Viper 480XV - Auto-Immobilisation Sequence; Disarming the System When Immobilised

28
©
2005
Directed Electronics, Inc. all rights reserved
Autoimmobilisation Feature
Immobiliser circuits automatically activate after 30 seconds.
Auto-immobilisation Sequence
1. Turn ignition off or disarm alarm.
2. After 30 seconds the systems Immobilisation circuits activate and engage the starter, ignition,
and fuel pump interrupts.
3. LED flashes at ½ normal speed.
Disarming the System when Immobilised
Use one of the following methods to turn off auto-immobilisation.
● Press the button of the transmitter or turn the ignition on and press the button of the
transmitter.
● Arm the alarm and then disarm the alarm.
● Turn the ignition on and enter the system valet/PIN code.
NOTE: H1/1 orange ground when armed will not activate during AutoImmobilisation.