Viper AS4325B Use And Maintenance

Maintenance
Operating guidelines AS4325B
July 2020
When scrubbing is complete, turn off the
on/off button to perform the following
maintenance.
Daily: Empty the clean water tank using
the solution tank drain knob under the
machine.
Daily: Empty the recovery tank using the
recovery empty hose. Bend the soft part
before removing the cap to control the
ow.
Daily: Inspect and rinse the oat ball cage
and inspect and clean the lid gasket if
required.
Local Viper dealer:
Phone number:
SN:
Daily: Remove the squeegee, and clean.
Inspect the blades and ip them or replace
them if required.
Daily: Leave the recovery tank lid open to
let the tank dry after it’s been cleaned to
avoid bad odor.
Daily: With the machine turned on and
the deck lifted, press the click off button
to release the brush/ pad holder then clean
and inspect before next use.
Daily: Charge the batteries: Connect
the battery charger cable to the electrical
socket. Light turns red when charging and
green when the charging is complete.
Weekly: Inspect the solution lter and
clean if required.

Viper AS4325B Specifications

General

Brand	Viper
Model	AS4325B
Category	Floor Machine
Language	English