What to do if the solution flow is insufficient in my Viper Scrubber?
If the solution flow in your Viper Scrubber is insufficient: - Check if the solution tank is empty and fill it if necessary. - The solution flow control valve might be blocked; clean the valve. - The solution might be dirty; empty the solution, clean the tank, and refill with clean solution.
Why vacuum system motor does not work and vacuum motor indicator light (53) does not turn on on Viper Floor Machine?
If the vacuum system motor isn't working and the vacuum motor indicator light (53) doesn't turn on for your Viper Floor Machine, it could mean that the PCB or keyboard is broken. You should change the PCB or key board.
Why brush motor does not work and brush indicator light (52) does not turn on on Viper Floor Machine?
If the brush motor isn't working and the brush indicator light (52) doesn't turn on for your Viper Floor Machine, it could mean that the PCB or keyboard is broken. You should change the PCB or key board.
How to fix insufficient solution flow in my Viper Floor Machine?
If the solution flow in your Viper Floor Machine is insufficient, consider these potential causes: the solution filter might be dirty, requiring you to clean it; the solution tank might be empty, so refill it; the solution flow control valve (31) could be clogged, so clean the valve; or the solution itself might be dirty, so clean the solution.
What to do if the vacuum system motor doesn't work and the vacuum motor indicator light doesn't turn on in my Viper Scrubber?
If the vacuum system motor isn't working and the vacuum motor indicator light doesn't turn on, the PCB or keyboard might be faulty. Change the PCB or keyboard.
What to do if the brush motor doesn't work and the brush indicator light doesn't turn on in my Viper Scrubber?
If the brush motor isn't working and the brush indicator light doesn't turn on, the PCB or keyboard might be faulty. Change the PCB or keyboard.
Why vacuum system motor does not work, brush indicator lights (53) flash on Viper Scrubber?
If the vacuum system motor isn't working and the brush indicator lights are flashing, the vacuum system motor may be overloaded. Check the vacuum system motor.
Why is the brush motor not working and the brush indicator lights are flashing on my Viper Scrubber?
If the brush motor isn't working and the brush indicator lights are flashing on your Viper Scrubber, it could be due to: - The deck motor being overloaded; use less aggressive brushes suitable for the floor you're cleaning. - Foreign materials (like tangled threads) preventing the brush from rotating; clean the brush hub.
What does it mean when the indicator light on my Viper Scrubber is red and the machine doesn't work?
If the indicator light on your Viper Scrubber displays red and the machine isn't working, the batteries are likely discharged. Charge the batteries to resolve this issue.
How do I stop my Viper Scrubber from leaving marks on the floor?
If your Viper Scrubber is leaving marks on the floor: - Check for debris under the squeegee blades and remove it. - The squeegee blades may be worn, chipped, or torn; replace the blades.
Covers DO NOT OPERATE, BEFORE OPERATING, WHEN USING, and BEFORE LEAVING/SERVICING machine instructions.
Safety instructions specific to performing maintenance on the machine, including parts and battery handling.
Key alerts concerning battery gases, flammable materials, and potential explosion risks.
Instructions for unpacking the machine, checking for damage, and verifying contents.
Step-by-step guide for safely removing and installing batteries, including a critical warning.
Includes brush/pad driver installation and pre-operation checks like squeegee and battery status.
Detailed steps for installing the squeegee, including loosening knobs and tightening securely.
Procedures for filling and draining solution and recovery tanks, including temperature and detergent guidelines.
Sequence for setting up handles, lowering squeegee, turning on power/motors, and starting cleaning.
Actions required after scrubbing and for storing the machine, including brush removal and battery disconnection.
Overview of maintenance tasks, their frequency, and responsible party.
Guidance on when to charge batteries and important safety precautions for charging.
Instructions for cleaning squeegee blades and checking them for wear or damage.
Steps for cleaning brushes and pad drivers, including safety precautions for sharp debris.
Maintenance procedures for the recovery tank, including cleaning and checking gaskets.
Identification of buttons and indicators on the control panel (items 46-54).
General| Brand | Viper |
|---|---|
| Model | Fang15B |
| Category | Floor Machine |
| Language | English |
To Next Page
