VIRTUFIT TR-50i - Running Belt Adjustment

17
VirtuFit TR-50i
NL
MAINTENANCE TREADMILL
(1) Running belt deviates to left - Start the machine, set speed at 2-3 km/h without a load on the belt,
use Allen key to turn the screw 1/4 turn (see g. 1). Then allow the machine to run without a load for 1-2
minutes. Repeat process until the belt
becomes central.
(2) Running belt deviate to right - Start the machine, set speed at 2-3 km/h without a load on the belt,
use Allen key to turn the screw 1/4 turn (see g. 2). Then allow the machine to run without a load for 1-2
minutes. Repeat process until the belt
becomes central.
(3) Running belt jam - If the running belt is in dead condition, use the Allen key to turn the screw 1/2 a
turn both left and right until the jam solved (see g 3).
RUNNING BELT ADJUSTMENT
VirtuFit Totally Foldable TR-50i
ENG