EasyManua.ls Logo

VIRTUFIT TR-50i - Safety Instructions

VIRTUFIT TR-50i
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
VirtuFit Totally Foldable TR-50i
ENG
SAFETY INSTRUCTIONS
- The treadmill is for indoor and not outdoor use to prevent damage on the product. Keep the storage
area dry, clean and at. It is forbidden to use the device for other purposes than before training.
- Only use the power cable supplied by the supplier for the treadmill. If the cable is missing, please
contact our company.
- If the treadmill should suddenly increase in speed due to an electronics failure or the speed being
inadvertently increased, the treadmill will come to a sudden stop when the pull pin is disengaged
from the console.
- Do not connect line to the middle of cable; do not lengthen cable or change the cable plug; do not
put any heavy thing on cable or put the cable near the heat source; forbid using socket with several
holes, these may cause re or people may be hurt by the power.
- Cut o the power when the equipment is not used. When the power is cut o , do not pull the power
line to keep the wire unbroken. Insert the plug to the socket with the safety ground circuit, for the
power-line is professional equipment .You must contact with the professional people directly while
the line is damaged.
- This Treadmill only for home-using, the max user weight is 120 KGS.
- Please keep the space at least 1 X 2 meter at the end of base frame to escape any accidents!
NOTE: THE VIRTUFIT TOTALLY FOLDABLE TR-50i TREADMILL IS PROVIDED IN 2 BOXES,
WHEN THIS IS NOT THE CASE, PLEASE CONTACT FITNESS BENELUX.

Other manuals for VIRTUFIT TR-50i