PROBLEM SOLUTIONS
Error Code Problem Solution
ERR The safety key is not on the yellow area of
the panel.
Put safety key back on.
E2 Trouble with the control board or motor. Try to change the control board.
If it’s not working, try to change
the motor.
E4 Trouble with the connected line or console. Try to change the connected
line. If it’s not working, try to
change the consol.
E5 Overcurrent protection. Restart.
E6 Trouble with motor. Change the motor.
E7 Trouble with connected line. Change the connected line.
E8 Overload protection. Restart.
E9 Overheat protection. Restart.
E10 Overvoltage protection. Restart.
E11 Low-voltage protection. Restart.
If you can not solve the problem, please contact your dealer.
To Next Page
Loading...
