FAQ
3. DEFECTS
1. Pulse sensor display does not work: This can have various causes. 1. The sensor cables running from the
pulse sensor to the display are incorrectly fitted or have come off during use. 2. It may be that the sensors
have become damp, dirty or greasy, clean them regularly.
2. Running belt: If the treadmill deviates to the left or to the right, you can easily solve it. If the running belt
deviates to the left, insert the Allen key in the left side of the tensioner and tighten it. If the walking belt
deviates to the right, insert the Allen key into the right side of the tensioner and tighten it. You tighten it by
turning the hex key clockwise. You can obtain an audiovisual explanation through your supplier.
3. Beating sound: A beating sound is normal and can be heard on every treadmill. The band is made in the
middle and this ensures that a light beating sound is heard when the treadmill is on.
4. Treadmill jerks when running: The tread floats over a smooth plate, which carries your weight. Every time
you place your feet on the tread, it touches the underlying plate. This underlying plate must always be
smooth so that the tread is not pinched by your own weight and / or the underlying plate, but continues to
slide over the underlying plate. Lubricate the plank regularly to prevent this.
5. Treadmill does nothing: With every treadmill a “Safety Key” must be placed on the display, see the manual.
If it is not on the display, the treadmill will not do anything.
4. EMERGENCY STOP
If you want to activate the emergency stop (in connection with small children or for other reasons), you can
remove the safety key after your use. At all times, the main switch must rst be switched o before you do
this.
VirtuFit Totally Foldable TR-50i
If you have any questions or missing parts, please contact your dealer.
To Previous Page
Loading...
