Viscount Physisplus Series User Manual

EN - 12
Quick Guide
Main Menu basic description
Pist. Combine
Enable/disable and configuration of the Piston Combine function.
Organ Solo
Configuration of [ORGAN SOLO] or [ORG SOLO] thumb piston operating mode.
A.P. Mode
Selection of the [AUTO PEDAL] or [AUTO PED] thumb piston operating mode.
CONTROLS menu: console controls settings, contains the following functions:
Function
Description
ENC Config
Configuration of the [ENC] thumb piston operating mode.
SWS Config
Configuration of the [SWS] thumb piston operating mode.
Swellbox Steps
Selection of the number of steps of the expression pedals.
Crescendo Pedal
Selection of the [CRESCENDO] pedal operating mode.
Link Master Vol.
Selection of the [MASTER VOLUME] knob operating mode.
Orchestra Couplers
Selection of which type of coupler affects the orchestral voices.
COMBINATIONS menu: organ’s combinations operating modes, contains the following functions:
Function
Description
Mem Bank Mode
Selection wheter all combinations or only general combinations have Memory Banks.
MIDI Out Controls in
Combinations
Enable/disable of storing the status of MIDI tab/thumb pistons in the combinations.
MIDI Out Controls
affected by Cancel
Enable/disable to switch off MIDI tab/thumb pistons by [C] or [CANC] thumb piston.
Couplers in Divisional
Combinations
Enable/disable of storing the status (and which type) of couplers in the divisional combinations.
Couplers in
Crescendo
Enable/disable of storing the status (and which type) of couplers in the Crescendo.
Tremulant
parameters in
Combinations
Enable/disable of storing the tremulant parameters in the combinations.
ENC/SWS in
Combinations
Enable/disable of storing the status of [ENC] and [SWS] thumb pistons in the general
combinations.
ENC/SWS affected
by Cancel
Enable/disable to switch off [ENC] and [SWS] thumb pistons by [C] or [CANC] thumb piston.
A.P. in
Combinations
Enable/disable of storing the status of [AUTO PEDAL] or [AUTO PED] thumb piston in the
general combinations.
A.P. affected by
Cancel
Enable/disable to switch off [AUTO PEDAL] or [AUTO PED] thumb piston by [C] or [CANC]
thumb piston.
Speakers in
Combinations
Enable/disable of storing the status of Internal, External, Main, Antiphonal amplifications
switches in the general combinations.
Orchestra Params in
Combinations
Enable/disable of storing the configuration parameters of orchestral voices in the combinations.
Tutti Mode
Selecting wheter Tutti combination controls stops as a general combination (replaces its content)
or in layered mode (adds its content).
AUDIO menu: audio settings, contains the following functions:
Function
Description
Reverberation
Settings of the Reverb effect.
Int. Amp Equalizer
Settings of the 5-band equalizer of the internal amplification.
Surround Sound
Settings of the side and front speakers.
Ext. Out Volumes
Settings of the volumes of the PROG. OUT audio outputs.
Input to Output
Routing of the audio inputs to the PROG. OUT audio outputs.
MIDI menu
The MIDI menu contains the following functions, contains the following functions:
Function
Description
TX/RX Channels
Selection of input and output MIDI A and B channels for each organ section.
TX/RX Filters
Enable/disable of input and output MIDI filters.
PRG in Combinations
Store of Program Change and Bank Select MIDI messages in combinations.
Coupled Notes Out
Enable/disable the transmission of MIDI notes generated by couplers.

Viscount Physisplus Series Specifications

General

Brand	Viscount
Model	Physisplus Series
Category	Musical Instrument
Language	English