11
SX45 Stereo Zoom Microscopewww.visioneng.com/support
OPERATION & SETUP
Camera focusing (Trinocular head only)
► Screw the camera adaptor onto the top of the head .
► Loosen screw on the top of the camera adaptor and set to the lowest position.
► Attach the camera to the adaptor.
► Zero the diopters and focus the specimen.
► Set the zoom to minimum, and adjust diopters.
► Gently slide up the camera adaptor focus until image is clear, at that point tighten the securing
screw to hold in position.