Vision Fitness X20 Service Manual

Vision Fitness X20

68 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

X20 & X30 ELLIPTICAL TRAINER

SERVICE MANUAL

IT ALL STARTS WITH A VISION

FITNESS™

IT ALL STARTS WITH A VISION

Table of Contents

Other manuals for Vision Fitness X20

Owner's Guide29 pages

Assembly Guide3 pages

Questions and Answers:

E
Elizabeth McdonaldJul 26, 2025
Why is the heart rate monitor not working on my Vision Fitness X20 Elliptical Trainer?
- S
  spencerlonnieJul 26, 2025
  There could be several reasons why the heart rate monitor isn't working. It might be due to poor contact between you and the HR grips or HR strap. Try re-centering the HR strap on your chest or wetting your hands before gripping the HR sensors. Also, the HR strap might have a low battery, in which case you should replace it. If the strap or grips are damaged, they will need to be replaced. In rare cases, the HR board in the console itself may be damaged, requiring a console replacement.
J
Jacob MorrisAug 5, 2025
What to do if my Vision Fitness X20 Elliptical Trainer has a thump or bump in the stride motion?
- C
  charles83Aug 5, 2025
  If you're experiencing a thump or bump during the stride motion, start by checking the assembly and tightness of all hardware. Loose hardware can often cause these noises. Also, inspect the roller wheels and tracks for dirt or debris, and wipe them clean. Finally, ensure that the footplate screws aren't too tight or too loose, as this can cause friction and lead to thumping or bumping sounds. Check the bolts and bracket under the footplate.
C
chandlerelizabethAug 16, 2025
How to fix a Vision Fitness Elliptical Trainer with no display on the console?
- J
  Jessica MartinezAug 16, 2025
  If there's no display on the console, first, ensure the power switch on the back of the console is turned ON. Next, check that the power adapter is properly plugged into the base of the Elliptical Trainer. Lastly, verify that the wire harness is securely plugged into the back of the console. To do this, remove the 4 screws holding the console to the console mast and plug in the wire harness.

Vision Fitness X20 Specifications

General

Stride Length	20 inches
Resistance Levels	20
Display Type	LCD
Weight Capacity	300 lbs
Heart Rate Monitoring	Contact Grips and Polar Receiver

Related product manuals

Vision Fitness X30

Preview: Vision Fitness XF40

Vision Fitness XF40

Preview: Vision Fitness X6100

Vision Fitness X6100

Preview: Vision Fitness X1500

Vision Fitness X1500

Vision Fitness X6000

Preview: Vision Fitness X6200

Vision Fitness X6200

Vision Fitness X6000DA

Preview: Vision Fitness X6200HRT

Vision Fitness X6200HRT

Vision Fitness X6250HRT

Preview: Vision Fitness X6200HRT/DA

Vision Fitness X6200HRT/DA

Preview: Vision Fitness S70-02

Vision Fitness S70-02

Vision Fitness PREMIER