21
SB-1900P_manual_en.doc
Status Update Messages:
The following status update messages are sent by the soundbar automatically when the
verbose mode is set to 2 or 3.
UPW - Power Status Update:
Sent when there is a change of power on/off status. Possible parameters: 2 chars
ON – Unit is turned on
OFF – Unit is going off
Example: UPW ON
USR - Functional status update:
Send when the function is active. Possible parameters:3 chars
AUX –Auxiliary input
OPT – Optical input
COA – Coaxial input
ABT – Bluetooth input
ARC – HDMI ARC input
Example: USR ABT
UPL - Play status update
Send when there is a changes of play status. Possible parameters:4 chars
PLAY – Playback is starting
PAUS – Playback is paused
STOP – Playback is stopped
Example: UPL PLAY
URP – Repeat playback status update
Send when there is a changes of repeat playback status. Possible parameters: 4 chars
RPTA – Repeat all
RPT1 – Repeat chapter
RPTF – Repeat off
RPTR – Random
Example: UPR RPTA
UVL - Volume Level Update:
Sent when there is a change in volume level or mute status. Possible Parameters: 3 chars
MUT – Mute is engaged
000 .. 100 – Current volume level. (Also sent when mute is cancelled.)
Example: UVL 068
To Next Page
Loading...
Need help?
General
