What to do if sound is only coming out one side of my Vision Speakers?
If sound is only coming from one side of your Vision Speakers, try these steps to identify the source of the problem: 1. Turn off the amplifier and switch the output connections. If the sound switches to the other side, the amplifier is working correctly, and the issue lies with one of the loudspeakers. 2. Switch the input connections and inspect the input cabling.
Alerts users about electrical hazards, not opening the unit, and avoiding moisture.
States the manufacturing origin of the products.
Lists conditions to avoid for installation and warns against liquids.
Advises saving packaging material for potential repairs and shipping.
Explains power rating, RMS/Program Power standards, and amplifier compatibility.
Position brackets over load-bearing studs and fix securely.
Connect speaker cables from amplifier to speaker brackets.
Attach loudspeakers to the brackets from above; they will click into place.
Squeeze the two tabs at the top/rear of the loudspeakers to release them.
Lift the loudspeakers upwards and off the mounts.
Steps to diagnose and fix issues where sound only comes from one speaker.
Steps to troubleshoot and resolve problems with very quiet audio output.
Details product dimensions, weight, materials, power, frequency response, and compliance.
Lists the items provided with the product, such as wall brackets.
Outlines the 2-year return-to-base warranty terms and conditions.
States that product details and manual content may change without notice.
To Next Page
General
