3. Electrical connection
➢ Check that the power supply voltage corresponds to that required by the equipment
(see the identification label on the back of the unit).
➢ Plug the power cord into an electrical outlet.
➢ Insert the connector of the cord into the power supply plug on the unit.
➢ Keep the main power plug accessible after installation, to be able to disconnect it at any
time.
3.7. Starting and stopping the equipment
1. Starting
➢ Press the Start button.
➢ Wait until the software starts.
2. Stopping
➢ There are 2 ways of switching the equipment off:
• Press the Start button.
• Select "Switch Off" in the VX22 menu.
To Next Page
Loading...