2.4. Precautions during use
Important!
▪ Do not place or use the VX22 in direct sunlight.
▪ Do not expose the VX22 to excessive dust or humidity.
▪ Do not place the VX22 in a hot air current (e.g. above a heater).
▪ Do not obstruct the ventilation vents.
▪ Never place the VX22 close to the following types of equipment which can perturb the
reception of commands from the remote control:
• halogen lamp (direct or indirect),
• fluocompact lamp,
• equipment emitting infrared radiation (e.g. autophoroptor, automatic tonometer,
etc.).
▪ Keep the screen surface clean. Protect it from dust, fingerprints and shocks.
▪ When you switch off the VX22, wait at least 5 seconds before switching it on again.
▪ Always use the provided power supply, never use power supply other than
manufacturer specified power supply.
2.5. Symbols
Important: consult the User guide supplied with the equipment
Manufacturer
Manufacturing date
Serial Number
Compliance to Medical Device Directive
93/42/EEC Class 1
The equipment must be disposed of separately according to WEEE
Directive.
To Next Page
Loading...