Visionix VX22NP - The VX22 Does Not Start; The Remote Control Does Not Work Correctly; The Change Button Does Not Change the Optotypes Distribution

VX22NP-VX22LP-VX22CP User Manual
45
6.1. The VX22 does not start
➢ Check that the power cord is correctly plugged into a power outlet.
➢ Check that the power cord is correctly plugged into the transformer and the VX22.
➢ Check that the indicator light on the the transformer is lit.
➢ Check tha the power oulet is operative.
Otherwise,
➢ Contact the After-Sales Service.
6.2. The remote control does not work correctly
➢Check that the dongle reception is correctly plug on the VX22.
➢ Replace the remote-control batteries.
If the problem persists,
➢ Contact the Ater Sales Service.
6.3. The change button does not change the optotypes
distribution
➢ Check that projector mode is not activated.
Otherwise,
➢ Contact the After Sales Service.