VT200 SERIES
Your new USB-C Portable Station can connect to any host with Type-C connectors that
support DisplayPort over USB-C providing a future-proof docking solution. Connect up to two
additional monitors as well as 2 USB Type-A and 1 USB Type-C accessories through a single
USB-C cable.
INTRODUCTION
SYSTEM REQUIREMENTS
CONNECT THE DOCK SUPPORTED RESOLUTIONS
SETTING UP THE DOCK WARRANTY
Compatible Devices
System with a USB-C port that supports DisplayPort over USB-C (DP Alt Mode MST) or
MacBook with a USB-C port that supports DisplayPort Over USB-C (DP Alt Mode SST) for
video.
For USB-C charging, a system with a USB-C port that supports USB-C Power Delivery 3.0 is
required and a USB-C power adapter up to 100W.
Operating System
Windows 11, 10, 8.1, 8, 7
macOS 10.12 or Later
iPadOS 16.2 or Later*
ChromeOS
Note: Maximum resolution and number of extended displays is dependent on host system
specifications.
*1 cloned display is supported on USB-C equipped iPad models, M Series processor
equipped iPad models with iPadOS 16.2 or Later support 1 extended display via Stage
Manager.
Step 1
Connect the included USB-C to USB-C cable to the Docking Station. Connect the other end
into your Laptop/Desktop Computer.
(Optional)
Connect a USB-C Power Adapter to the USB-C Power Delivery port on the Docking Station.
Support for up to 100W of Power Passthrough.
Step 2
Connect your displays to the docking
station, see chart below for supported
resolutions.
USB-C to Host USB-C Power In
(Optional)
*Windows and Chromebook systems support up to two external displays extended or cloned *macOS systems support up to one external display extended and one
cloned/mirrored external display *For triple display support laptop display must be disabled
Windows PC Dock Setup
Connect the docking station and allow Microsoft Windows to initialize the docking station.
To configure your displays, right click on the Desktop and select Display Settings.
Set your layout and display resolutions and apply any changes.
macOS Dock Setup
Connect the docking station and allow macOS to initialize the docking station.
To change preferences and configure displays, choose the Apple menu > System
Preferences, click Displays, then click Display, macOS Supports 1 extended display via
DisplayPort SST.
iPadOS Dock Setup
Rotate the iPad into landscape mode and open the Settings app. Select Home Screen &
Multitasking and Enable Stage Manager.
VisionTek Products LLC, (“VisionTek”) is pleased to warrant to the original purchaser (“Warrantee”) of the Device
(“Product”), that the product will be free from manufacturing defects in material for Two (2) Years when given
normal and proper usage. The product must be registered within 30 days from the original date of purchase to
receive this 2 year warranty. All products not registered within 30 days will ONLY receive a 1 year limited warranty.
VisionTek’s liability under this warranty, or in connection with any other claim relating to the product, is limited to
the repair or replacement, at VisionTek’s option, of the product or portion of the product which is defective in manu-
facturing material. Warrantee assumes all risk of loss in transit. The returned products shall be the sole property of
VisionTek. VisionTek warrants the repaired or replaced products will be free from manufacturing defects in material
for the remainder of the warranty period.
VisionTek reserves the right to inspect and verify the defectiveness of any products or portion of product returned.
This warranty does not apply to any software component.
© 2023 VisionTek Products, LLC. All rights reserved. VisionTek is a registered trademark of VisionTek Products, LLC.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries. macOS and
iPadOS are registered trademarks of Apple Inc., registered in the U.S. and other countries and regions.
FULL WARRANTY DISCLOSURE AVAILABLE AT WWW.VISIONTEK.COM
Product must be registered within 30 days of purchase for warranty to be valid.
IF YOU HAVE QUESTIONS OR NEED ASSISTANCE WITH THIS PRODUCT,
CALL SUPPORT AT 1 (866) 883-5411.
1
3
4 5
6
1 Display 1 Display 2 Displays 3 Displays*
Display Connection DP or HDMI VGA DP, HDMI, VGA DP + HDMI + VGA
Windows / ChromeOS 3840 x 2160 @ 30Hz 1920 x 1080 @ 60Hz DP: 2560 x 1440 @ 60Hz
HDMI: 1920 x 1080 @ 60Hz
VGA: 1920 x 1080 @ 60Hz
1280 x 720 @ 60Hz
macOS / iPadOS 3840 x 2160 @ 30Hz 1920 x 1080 @ 60Hz N/A N/A
PORTABLE USB-C DOCKS
USER MANUAL
• Compatible with USB-C DP Alt Mode systems
• USB-A 5Gbps, USB-C 5Gbps ports
• USB-C Power Passthrough up to 100W (USB-C Charger not included)
• Supports 1 monitor 4K @ 30Hz (HDMI or DisplayPort
• Supports 2 monitors 1080p @ 60Hz
• Supports extended and mirrored modes
• VT200 Series Portable Dock
• USB-C to USB-C Cable
• User Manual
FEATURES
CONTENTS
Port Description
1. VGA Port (DP Alt Mode) Connect a display with a VGA port to stream video up to 1080P@60Hz
2. HDMI 1.4 Port (DP Alt Mode) Connect a display with a HDMI port to stream video up to 4K@30Hz
3. DP 1.4 Port (DP Alt Mode) Connect a display with a DP port to stream video up to 4K@60Hz
4. USB-A 3.0 Ports Connect a USB-A device, supports 5Gbps transfer speeds
5. USB-C Host Upstream Port Connect to a laptop or PC, up to 5Gbps to host, DP Alt Mode Video and USB-C Power
Passthrough charging up to 100W
6. USB-C 3.1 Gen 1 Port Connect a USB-C device, supports 5Gbps transfer speeds
7. USB-C Power In Connect a USB-C power adapter to passthrough up to 100W to host
DOCKING STATION PORTS
To Next Page
Need help?
General
