3.6 PGM-5 Installation
The PGM-5 module is an output interface module designed to provide alarm, events and status signals to external
devices such as long range wireless monitoring transmitters, CCTV systems, automation systems, and LED
announcement panels.
Review Figure 3.1.2, symbol F identifies the location for the PGM-5 module. For more information about installing the
PGM-5 module, see D-302182 PGM-5 Installation Instructions.
PGM-5 module can be used in the panel only when the EXP-33 Expander Module or PowerLink3 Module is not in use.
D-306917 PowerMaster-33 G2 Installer's Guide 13
To Next Page
Loading...
