SPEECH AND SOUND CONTROL
D-302542 15
Note: The message recording feature refers to the
entire system and not per partition.
Message Playback
To listen to a message left by another user of the
system:
Click
and listen. PLAY will be displayed and
the message will be played back over the built-in
loudspeaker. When the playback ends, the display
will revert to the normal status-displaying mode. If
more than 1 minute elapsed after recording, the
MSG indication will disappear.
Chime ON/OFF
You can disable / enable the chime zones by
alternate clicking of the <8> key, as shown below:
PRESS
RESULTANT DISPLAY
CHIME ON
CHIME OFF
↓
READY HH:MM
CHIME indicator lights steadily when “chime on”
is selected.
To Next Page
Loading...
