12
Operation
NOTE: The following control panels are for explanation purpose only. The control panel of the unit you purchased may be slightly different
according to the models. Your machine may not contain some indicators or buttons. The actual shape shall prevail.
1
Using the Control Panel
MODE
Cool
Fan
Dry
CONSTANT FAN(Press 3s)
MODE
CONSTANT FAN(Press 3s)
MODE button
Selects the appropriate operating mode. Each time you press the button, a mode is selected in a sequence that goes
from COOL, DRY, and FAN. The mode indicator light illuminates under the different mode setting.
NOTE: On above modes, the unit operates the auto fan speed automatically.
Up (+) and Down (-) buttons
Used to adjust (increasing/decreasing) temperature settings in 1°C / 2°F (or 1°F) increments in a range of 17°C / 62°F to
30°C / 88°F (or 86°F).
NOTE: The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to
the other, press and hold the Up and Down buttons at the same time for 3 seconds.
DRY operation
□ Press the “MODE” button until the “DRY” indicator light comes on.
□ The fan speed or the temperature cannot be adjusted. The fan motor operates at LOW speed.
NOTE: Keep windows and doors closed for the best dehumidifying effect.
FAN operation
□ Press the “MODE” button until the “FAN” indicator light comes on.
□ Press the “FAN SPEED” button on the remote control to choose the fan speed. The temperature can not be adjusted.
□ Do not put the duct to window.
To Next Page
Loading...
Need help?
General
