Vista 12 - STEP 6 | STAND IT UP; STEP 7 | SIDES AND TOP

TRUGOLF
6 7
VISTA 10/12
Stretch bungee cord up and onto the INSIDE KNOBS to create a zigzag pattern.
STEP 6 | STAND IT UP
Tip the frame back up so that Corner pieces [A] & [B] are on the bottom.
STEP 7 | SIDES AND TOP
Assemble the walls as shown below.
Next, assemble the FRONT of the frame, start from one side and work your
way to the other. Connect the LIGHT BAR [Q] last. See Overhead Light
Instructions (pg 20) for connecting light.
Attach the remaining bungee cord to the frame. Start from the center
moving out to the corners.
1
3
2
E
I
H
L
A
B
AA
BB
CC
DD
C
D
G
K
F
J
P
O
Q
N
M
DD
CC
A
B