IFU-01, Rev. A Page 14 of 20
VitalConnect Platform
VitalConnect platform consists of the following sub-systems:
1. VitalConnect Sensor
2. VitalConnect Relay Software Library
3. VitalConnect Secure Server Software
Instruction for use for the Mobile Healthcare Service Provider
1. VitalConnect Secure Server Software Library
a) Download Software
1) Goto www.vitalconnect.com
2) Select Download
3) Select Server Software
4) Select Media (location to download the software application)
5) Login using Vital Connect provided user ID, and user assigned password
6) Select “Start Download”
b) Ensure that applicable software tools, drivers, etc. have been properly installed to allow
communication between the “server software library”, “service provider user interface
application” and the “relay software library”.
c) Configure user parameters as required (relay software library and server library).
d) Prepare and provide user with additional user instruction as applicable.
2. Ensure that VitalConnect Relay intended to collect end user vital data is functional.
Instruction for use for the end-user
1. Unpack the relay module and plug into a 110-120Vac outlet.
2. Confirm that the green LED light is “on” on the module.
3. Follow VitalConnect Sensor assembly and use instruction below.
To Next Page
Loading...
