IFU-01, Rev. A Page 3 of 20
2. VitalConnect Relay Software Library
The Relay Software Library manages bi-directional communication between the Sensor Module and
the Server Software Library and is installed on a relay device.
3. VitalConnect Server Software Library
The Server Software Library is installed on a central server, manages the upload, processing and
storage of sensor data, as well as real-time configuration of and notifications from the VitalConnect
Platform.
Antenna Description
The VitalConnect Sensor Module utilizes a Fractus Micro Reach Xtend 2.4GHz Chip Antenna (part #FR05-
S1-N-0-110) in order to communicate via Bluetooth low energy to the relay. This antenna is a linear,
omnidirectional, monopole antenna that operates in the 2.4-2.5GHz range. The antenna is connected to
the Bluetooth transceiver through a 2 inductor matching network that has been optimized to maximize the
power radiated by the antenna and minimize the voltage standing wave ratio (VSWR). The product is for
use with BT 4.0 only.
Indications for Use
The VitalConnect Platform is a wireless monitoring system intended for use by healthcare
professionals and researchers for unattended surveillance of patient physiologic data. This includes
heart rate, electrocardiography (ECG), heart rate variability, respiratory rate, skin temperature, fall
detection, step count and posture. Data is transmitted wirelessly to a central location where it is
stored for analysis. The VitalConnect Platform can be configured by Authorized Persons to notify
healthcare professionals when physiologic data falls outside selected parameters.
The VitalConnect Platform is intended for use on general care patients which are at least 18 years
of age. It is not intended for use on critical care in-patients. It is not intended as a diagnostic or
alarm device.
To Next Page
Loading...
