IFU-01, Rev. A Page 19 of 20
Tips for Best Use
Connection
Check module to ensure logo is facing up before connecting to the patch.
Ensure that sensor module is firmly connected
Green LED light will blink several times if module is properly connected AND patch has sufficient
battery life to operate.
After showering or bathing, system may lose connection. Please allow 15 minutes to air-dry and
retry connecting to Apps
Troubleshooting
For trouble shooting, contact product manufacturing
Manufacturing contact information:
Vital Connect Inc.
2105 S. Bascom Ave., Suite 316, Campbell, CA 95008
Phone: 408 (963) 4600. www.nitalconnect.com
To Next Page
Loading...
