INSTALLATION
2 CHAPTER 1
1.2.2 UNPACKING
The Vitronics Soltec mySelective.com is standard packed on a wooden floor.
1.2.2.1 PACKED IN CRATE
When necessary, the machine is packed in crates (e.g. when shipped).
If packed in crates the following procedure should be followed.
FIGURE 1.2 CRATE
Uncrate order:
1. Take off top cover A.
2. Remove side panels B.
3. Remove front and backcover C.
Use the above figure order A,B,C to uncrate. Other order can result in damaging the machine or
personal injury.
1.2.2.2 PACKED ON A WOODEN FLOOR
Unpacking order:
1. Remove PE-foil.
2. Remove lash cord and take off spare parts.
3. Remove lash cord and foam from machine.
4. Remove machine from wooden floor according to next paragraph.
C
B
A
To Next Page
Loading...
