Need help?Do you have a question about the Vitronics Soltec myReflow and is the answer not in the manual?
General| Brand | Vitronics Soltec |
|---|---|
| Model | myReflow |
| Category | Soldering Gun |
| Language | English |
Provides overview of the system's safety features and recommends training for operators.
Explains warning, caution, and note symbols used in the manual for safety.
Lists a safety kit (UG0200) with part numbers and quantities for protective equipment.
Details potential hazards like flux vapors and hot surfaces, including precautions.
Explains dangers of flux vapors from solderpaste and necessary extraction and protective measures.
Warns about burn risks from hot surfaces and advises on protective gear and cooling procedures.
Details high voltage hazards and safety precautions for electrical circuits.
Highlights dangers from moving parts and advises caution with covers and mechanisms.
Emphasizes the need for eye protection with safety glasses when operating the machine.
Advises following safety data sheets for nitrogen supply precautions.
Discusses fire risks associated with flux vapors and the importance of exhaust and fire extinguishers.
Explains the importance of a properly functioning exhaust system for safety and machine operation.
Lists general precautions for maintaining a clean, safe, and well-ventilated working environment.
Describes the meaning of the machine's buzzer and signal lights (green, yellow, red).
Details the emergency stop system, its function, and how to reset it.
Explains the role of automatic circuit breakers and fuses in protecting the machine.
Describes how current relays protect motors from overcurrent by switching them off.
Explains how frequency inverter controllers manage motors and handle overcurrent alarms.
Mentions safety covers and safety switches on main covers for protection.
States that installation should only be done by trained personnel and mentions an installation sheet.
Covers the safe transport of the machine, including understanding packaging symbols.
Explains symbols found on packaging for handling and transport.
Provides procedures for unpacking the machine, whether in crates or on a wooden pallet.
Details the step-by-step process for uncrating the machine.
Outlines the steps for removing packing material from a machine on a wooden pallet.
Describes how to remove transport straps from the machine.
Explains how to safely lift and move the machine using a forklift, including fork placement.
Introduces the section on connecting the machine to power, nitrogen, and exhaust systems.
Details the electrical connection process, phase rotation, and safety lock-out.
Explains how to connect the nitrogen supply hose to the machine.
Covers the connection and importance of the exhaust system for safety and machine operation.
Guides on unpacking and installing the personal computer and its peripherals.
Describes the steps to power on the machine and prepare for leveling.
Provides detailed instructions on how to adjust the machine's threaded feet to ensure it is level.
Refers to subsequent pages for detailed installation sheets and requirements.
To Next Page
