Installation Guide myReflow
C
HAPTER 1 1
Safety features 1
1.1 GENERAL
The myReflow Soldering System is designed and build only for soldering and handling printed cir-
cuit boards.
Safety features provides safe operating / working conditions for both the operator / maintenance-
man and the machine.
We urge all users, including operators and maintenance personnel, to read this chapter before
using the Vitronics Soltec soldering equipment.
We strongly recommend all personnel that will work with the Vitronics Soltec myReflow Solder-
ing System, to follow the official “VITRONICS SOLTEC TRAINING COURSE”, to ensure effi-
cient and safe operations.
Only qualified personnel that have joined and completed this training should work on the
machine.
VERSION 2009 June
To Next Page
Loading...
