Vitrum Clima - Activation Short;Long Press

SIMPLY INIMITABLE.
7
• On
• O 
• Toggle
Con gurations for 1 bit object in events of pressing or
releasing the button:
• Value 0-255 (generic signed int)
• Value o-100% (scaling value in steps of 5%0)
• HVAC Mode value (according to DPT_HVAC-
Mode 20.102)
o AUTO
o COMFORT
o STANDBY
o ECONOMY
o BUILDING PROTECTION
Feedback object
Send Telegram on
power up
KNX PARAMETER SETTINGS
Function On press / release
On press / release
, cyclic if press
On press / release
, cyclic if release
On press / release
and always cyclic
Enabled
Disable
Enabled
Disable
Can be used when button is set as “1 bit – Toggle” in
order to have always the status of actuator updated.
With this parameter it is enabled the sending of
the status of the button without having to wait for
a change of front; a telegram is sent accordingly to
the press/release state of the button.
Note 1:
When periodical sending is enabled for one only
of the two edges, switching in the state where “no
telegram” is associated causes the periodic sending
stop.
Note 2:
If you want to handle both instant sending and
periodic sending on only one of two fronts without
performing an action on the other, for this you must
select the option “no telegram”.
Note 1:
If you enable the sending of the telegram for button
where you have already set the cyclic sending ; then
the cyclic sending will start automatically at power
on; at the end of the  rst period.
Note 2:
If the command selected is “TOGGLE”, the  rst
value sent is always 1 because the CO value on
power on is 0.
7. Activation short/ long press
The di erence duration between short and long
press is de ned by the generic parameter “Mini-
mum time for long press button central / left”. You
can set to send a telegrams with di erent values
on short and long press or decide to send com-
mands only on one of this events.
The parameters and mode of transmission of
telegrams can be managed through “activation
on long and short press” are the same set with the
con guration “Activation of press “ to the exclu-
sion of the function of cyclic sending that is not
provided here.