Vitzro VITAC 200 - Parameter Management with VICOM-Manager; Checking and Modifying Parameters

18
⑤ 
Checking and modifying major parameters

You can check the information or modify the setting value by selecting a menu item located at the
left side of VICOM-Manager.
 
- Measurement :
You can check the voltage and frequency of the commercial and emergency power.
 
- Status monitoring tab :
You can check the status of the commercial and emergency power,
and switch on/open status.
 
- Settings tab :
You can check the current value of major parameters. To change the setting value,
input the value to change and click the “Apply to IED” button.