Vivint — User Guide
- 32 -
alarm right away. Most sensors trigger the alarm siren while some sensors may be set to trigger a silent alarm
without sounding the siren.
NOTE: Temporarily muting the alarm siren
When the alarm siren is sounding, you can temporarily mute (turn off) the alarm siren by pressing
any button on the panel interface. Pressing a button will mute the alarm siren for one second. The
alarm siren will continue to sound until the proper disarming code in entered.
Burglary Alarm Siren
If there is a burglary alarm tripped while the system is armed, the Control Panel sounds the alarm siren for a pre-
set time. After the time expires, the alarm will stop sounding.
The system limits the number of times a sensor can re‐trigger an alarm while the system is armed. The setting is
one to six times per sensor, per arming period.
Alarm Memory
If an alarm has occurred while the system was armed, the Disarm screen shows the time and date of the alarm
and the sensor(s) that triggered the alarm.
After the system is disarmed, the Alarm Memory screen appears. The Alarm Memory screen shows the sensor
(s) that have caused the alarm. If more than one sensor has been triggered, the display shows the order in which
the alarms occurred.
The alarm memory is automatically cleared the next time the system is armed. You can also check the Clear
Alarm History button and press OK to manually clear the alarm memory (NOTE: 24‐hour fire and CO sensors
that are still violated remain in alarm memory).
Two-Way Voice Communication
Two‐way voice communication provides a method for alarm verification and can provide emergency assistance.
The Control Panel contains a built‐in microphone that can monitor sounds around the area of the Control Panel.
The built‐in microphone and speaker allows Two‐way voice communications with a Central Station operator
after an alarm. The Central Station operator can converse with people in the premises through the Control Panel
speaker and microphone.
Your Technician can set the system to use Two‐way voice communications after an alarm and/or after a panic
alarm is triggered.
To Next Page
Loading...