Vivint CP01 - Viewing and Acknowledging Trouble Alerts

Vivint — User Guide
- 48 -
4. To list urgent messages first, select Priority.
5. To return to the message list, press Back.
6. When the message reviewing session is over, the sort options will reset.
Viewing and Acknowledging Trouble Alerts
The system continually polls wired sensors, wireless sensors and the Control Panel itself to ensure optimal oper-
ating conditions at all times. If trouble is detected, the system alerts you.
The system monitors the following conditions, among others:
l
AC power to the Control Panel
l
Telephone line (optional)
l
Cell telephone connection (if used)
l
Control Panel backup battery
l
Sensor batteries
l
Sensor supervisory status (if used)
l
External siren connection
l
Sensor radio reception and sensor tampering (sensor’s case opened) when disarmed
l
Control Panel tampering (panel’s case opening) when disarmed (optional)
l
Two-way voice communication to the Central Station
You have the option to have any or all trouble conditions reported to the Central Station. If a trouble condition
exists, make sure to have your system serviced immediately to ensure no lapse in service or protection.
Trouble Alert Icon
If the system detects trouble, the Control Panel flashes a trouble alert icon and sounds a series of 6 beeps every
minute. Scrolling text along the bottom of the display also describes the trouble condition.