Vivint — User Guide
- 47 -
4. Press Back to return to the message list, or press Delete to erase the message. NOTE: If you check the
Mark Read box, the message remains on the message list (If you decide not to delete it), but it no longer
displays in bold.
5. When deleting a message, a confirmation screen displays. Press Delete Message, or to return to the
message, press Cancel.
Reading Confidential Messages
NOTE: When a confidential message is sent to the Control Panel, only the Admin User with the a
valid PIN code can read the message.
To read a confidential message
1. Press the message line on the message list. If the message is a confidential message, the Code Entry
screen appears.
2. On the Code Entry screen, Enter the Admin User PIN code. Regular User PIN codes are not accepted.
3. View the displayed message.
4. You can either Save or Delete the message.
Filtering Messages
To select the type of messages that are displayed on the message list, use the Message Filter screen.
1. To display the Message Filter screen, press Filters.
2. Select the types of messages to display. To select all types of messages, press All. To return to the mes-
sage list, press Back.
The message filters will reset when the following occurs:
l
You select All Types
l
Your message reviewing is over
l
The system displays the Security screen
Sorting Messages
To select the order in which messages are displayed on the message list, use the Message Sort screen.
1. To display the Message Sort screen, press Sorts.
2. To sort the messages, pick from the following options:
▪ Date received
▪ Date expired
▪ Alphabetically
3. To reverse the display order, select Reverse.
To Next Page
Loading...