Vivint — User Guide
- 44 -
Confi g u ri n g User Access
After you create a new User ID, you should configure its access settings.
Select one of the three options:
l
Always
l
Never
l
By Schedule
Ge n e rating a remo te acce ss code
Deleting Users
1. To remove a User from the system, press that User name.
2. Press Delete.
3. A confirmation screen appears to verify that you really want to delete the User ID. Press Yes.
NOTE: You can change the Admin User PIN code, but you cannot delete the Admin User.
Changing a User PIN code
1. To change a User PIN code (physical access code) from the Users screen, press that User name.
2. For the Physical Access option, Press View.
3. Press the 4-digit PIN code.
4. Enter a new four‐digit User PIN code, and then press Done.
5. To confirm the User PIN code, enter the four digits again, and then press Done.
Duress User
The Duress User Code (User ID 3) initiates a silent alarm for help by secretly sending a Duress report to the Viv-
int Central Station.
Use the Duress Code when someone is forcing you to operate your security system against your will. When you
use the Duress Code, a silent report is immediately sent to the Central Station and they will dispatch help.
To Next Page
Loading...