Vivint — User Guide
- 45 -
Setting the Duress User Code
1. On the Users screen, press Duress User.
2. A confirmation screen appears: Press Create Duress User.
3. Enter a four‐digit code for the new Duress User Code and press Done.
4. To confirm the Duress User Code, enter the Code again and press Done.
Secret Duress Button
On the Home Screen, in the lower right corner, the system logo always appears.
The System logo is the secret duress button while the system is armed.
While Armed
With the system armed, pressing the logo displays the standard disarm code entry screen. Use a valid User
Code or a Duress User Code to disarm the system. The system disarms normally, but a silent duress report is
sent to the Central Station and they will dispatch help.
While Di sa rme d
You can also use the secret duress button while the system is disarmed. Pressing the logo displays a code entry
screen. Enter the Duress User Code and a silent duress report is sent to the Central Station and they will dis-
patch help. The system remains disarmed.
To Next Page
Loading...