Vivint — User Guide
- 56 -
Chime Option Description
Chime 5 Ding‐dong with Voice #2
Chime 6 Ding‐dong #3
Chime 7 Ding‐dong with Voice #3
Chime 8 Ding‐ding
Chime 9 Ding‐ding with Voice
Chime 10 Chime#1
Chime 11 Chime with Voice #1
Chime 12 Chime#2
Chime 13 Chime with Voice #2
See Also :
l
"Voice Alert for Arming and Disarming" on page 58
l
Adjusting Volume and Brightness
You can adjust the brightness of the Control Panel touchscreen display and the volume of the speaker.
To configure the brightness and volume
1. At the Home screen, press Settings.
2. Press Panel Settings.
3. To configure the volume, press the Volume button, adjust the volume to your desired level, and then
press OK.
4. To configure the brightness, press the Display Brightness button, adjust the brightness to your desired
level, and then press OK.
The volume setting does not affect the alarm sounder volume.
Adjusting the Display Backlight Timeout
The Control Panel backlight timeout sets the length of time that the display stays lit after use. You can adjust the
backlight to 30 seconds, 1, 2, 5, or 10 minutes, or to Always On (to light the display at all times).
To Next Page
Loading...