Vivint — User Guide
- 50 -
Viewing the Current Trouble Alerts
1. To display all current trouble alerts, press the Alerts icon.
2. View the listed trouble events. If there are more than 3 alerts, use the ↑ and ↓ arrows to scroll through the
list.
3. Press the Alert message to acknowledge it. This action silences the alert beeps.
Trouble Alert Beep Hold-Off
During the installation, as an option, the system can be configured by your Technician to suppress the trouble
alert siren from 10 PM to 9 AM. Any trouble alerts will still be displayed and reported (if enabled), but the siren
does not beep during nighttime hours. Some trouble conditions may clear automatically while other trouble con-
ditions may require service to correct. If a trouble condition still exists after 9 AM, the siren beeps to indicate
trouble.
NOTE: Regardless of whether the trouble alert siren is suppressed or not, every trouble condition is
always displayed on the trouble alert list and recorded in the system history event log.
To Next Page
Loading...