Vivint — User Guide
- 52 -
The system waits up to 60 seconds for each remote command before automatically disconnecting. If you already
know the remote command telephone key number, you can enter it before the command announcement fin-
ishes.
Use the following telephone keys to control your system:
Press 1
For System Status Report
Press 2
To Arm the System in Away Mode
Press 3
To Arm the System in Stay Mode
Press 4
To Disarm the system
Press 5
To turn On Auxiliary Output (if used)
Press 6
To turn Off Auxiliary Output (if used)
Press 7
To stop System Status Report
Press 8
To Hang Up
Press 9
To Repeat the Command Menu
Press #
To Bypass All Open Sensors and Arm the System
NOTE: Remember to press 8 to hang up when you are finished remotely controlling the system.
To Next Page
Loading...