Vivitar BS-KI48 - Page 2

4. When the baery is fully charged, the red indicator light
will turn off. Disconnect the charger from the speaker
and the outlet. The speaker is ready for use.
Note: Overcharging could reduce the life of the baery. A
charged baery will lose its capacity if it is not used
on a regular basis.
Important!
Ensure that the baery is fully charged if the speaker is not
used for a long period of me. To avoid a complete
discharge of the baery, charge the speaker at least every
6 months.
Baery Notes
• When the baery power is low, the speaker will beep
every 30 seconds.
Sweden, and United Kingdom and within EFTA in
Iceland, Norway and Switzerland.
Locaon of Controls
① Microphone
② Power/ Play/Pause/Answer
③ Indicator LED/Siri
④ Charging Port
⑤ Auxiliary Port
First Time Use
Charging the Baery
The BS-KI48 Speaker has a built-in, rechargeable
lithium-polymer baery. To avoid damage, do not aempt to
remove the baery. The full performance of the baery is
achieved aer two or three charging-discharging cycles.
Charge the baery fully before first use.
1. Connect the USB cable to the speaker.
2. Connect to the correct outlet (wall, computer).
3. When the charger is connected to the speaker, the red
indicator light will turn on.
Note: Charging the baery fully may take up to 2 hours.
- Increase the separaon between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
EC Declaraon of Conformity
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaon.
Note: The manufacturer is not responsible for ANY
interference, for example RADIO or TV interference,
caused by unauthorized modificaons to this
equipment. Such modificaons could void the user's
authority to operate the equipment. This product is CE
cerfied according to the provision of the R&TTE
Direcve (99/5/EC). This declares that this product is
in compliance with the essenal requirements and
other relevant provisions of Direcve 1999/5/EC.
Please note that this product uses radio frequency
bands not harmonized within EU. Within the EU this
product is intended for use in Austria, Belgium,
Denmark, Finland, France, Germany, Greece, Ireland,
Italy, Luxembourg, the Netherlands, Portugal, Spain,
FCC Statement
This device complies with the part 15 of the FCC rules.
Operaon is subject to the following two condions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operaon.
Cauon: Changes or modificaons not expressly approved
by the party responsible for compliance could void
the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protecon against harmful
interference in a residenal installaon. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instrucons, may cause harmful
interference to radio communicaons. However, there
is no guarantee that interference will not occur in a
parcular installaon. If this equipment does cause
harmful interference to radio or television recepon,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
In the Box
• BS-KI48 Bluetooth® Speaker
• USB Charging Cable
• User Manual
Safety Precauons
• Please read this User Manual carefully and follow all
instrucons.
• To avoid damage or malfuncon of the speaker do not
drop it from high locaons and/or on to hard surfaces, do
not place heavy objects on it.
• Keep speaker away from humidity, water and other liquids.
If it does get wet, do not operate as this may cause an
electrical shock, explosion and damage to the device or to
the user.
• Do not place or keep this product near heat sources, such
as direct sunlight, radiators, stoves or any other apparatus
that produces heat. This may cause an explosion, degrade
the performance and/or reduce baery life.
• Do not modify, repair or disassemble device (especially the
baery). Doing so will void the warranty. The baery in
this device may present a risk of fire or chemical burns if
misused or tampered with.
• Use only supplied and manufacturer-approved chargers
and unplug this device when not in use for long periods of
me or during lightning storms.
Thank you for purchasing the Vivitar® BS-KI48 Bluetooth®
Speaker.
Introducon
With this speaker, you will enjoy listening to high quality
music wirelessly using Bluetooth® technology. Easily
connect to any mobile device for both conversaon and
music listening. It also pairs with other Bluetooth-en-
abled devices (Bluetooth V4.2+EDR specificaon and
HSP, HFP, A2DP and AVRCP profiles).
Specificaons
• Bluetooth Specificaon: V4.2
• Operaon Frequency: 2.402-2.48GHz
• Supported Profile: HSP, HFP, A2DP, AVRCP
• Operaon Range: Up to 33 feet(10 meters)
• Play Time: About 6 hours
• Baery Type: 400mAh, 3.7V, Polymer Lithium Ion
Baery
• Charge Time: About 2 Hours
Vivitar® BS-KI48
Bluetooth® Speaker
User Manual
① ②③④⑤