56
E
F
S
G
Step 2: Connecting the DVR-210 to your computer
1. Connect one end of the USB cable to the USB connector on the DVR-210.
2. Connect the other end of the USB cable to an available USB port on your
computer.
3. Turn on the power.
[Select Mode] menu appears on the screen.
4. Select [PC camera] with the zoom lever, and press the button.
5. Position the DVR-210 steadily on top of your computer monitor or use a
tripod.
Note:
When using this DVR-210 as a PC camera, there is no need to install any batteries into the DVR-210.
Step 3: Running your application software(i.e. Windows NetMeeting)
To use Windows NetMeeting for videoconference:
1. Go to Start => Programs => Accessories => Communications => Net Meeting to launch the NetMeeting
program.
2. Click the Start Video button to view live video.
3. Click the Place Call button.
4. Type the e-mail address or the network address of the computer that you are calling.
5. Click Call. The person that you are calling must also have Windows NetMeeting running and be willing accept your call to
start the videoconference.
Note:
The video resolution for videoconferencing applications is generally 320 x 240 , or 160 x 120.
For more information about the operation of videoconference application software, refer to its respective help
documentation.
When the PC cam function is activated (i.e. images are being transferred), the LED (green color) blinks. If the USB cable
is unplugged at the time of transferring images, the screen would become blank the next time when you run the PC cam
function. In this situation, you should restart the computer. The proper operating method should be: Close the PC cam
application, then remove the USB cable.
To Next Page
Loading...
