If more than one input device is con-
nected, press the SOURCE button and
use ▲▼ to scroll among devices.
(Component is supported through the
RGB to COMPONENT ADAPTER.)
• PC 1 / 2: Analog RGB
DVD input YCbCr/ YPbPr, or HDTV input
YPbPr via D-sub connector
• HDMI: High-Definition Multimedia Interface com-
patible
• DisplayPort: Digital display interface
• BNC: Analog RGB
• COMPONENT: DVD input YCbCr/ YPbPr, or
HDTV input YPbPr
• VIDEO: Tradition composite video
• S-Video: Super video (Y/C separated)
5.
When the “Power Off? /Press Power
again” message appears, press the
POWER button. The projector turns
off.
Caution:
1. Be sure to remove the lens cap before starting projector.
2. Do not unplug the power cord until the READY LED stops flashing–indicating the projector has
cooled down.
— 14 —
To Next Page
Loading...
