DLP Projector – User’s Manual
Starting and Shutting down the Projector
1.
Connect the power cord to the projector.
Connect the other end to a wall outlet.
The POWER LED on the projector
light.
2.
Turn on the connected devices.
3.
Ensure the POWER LED displays a
solid orange. Then press the POWER
button
of the remote to turn on the pro-
jector.
The projector splash screen displays and
connected devices are detected.
See
Setting an Access Password
(Security Lock)
on page 12 if security
lock is enabled.
4.
If more than one input device is con-
nected, press the SOURCE button
of
the remote
and use ▲▼ to scroll
among devices.
(Component is supported through the
RGB to COMPONENT ADAPTER.)
• VGA 1/VGA 2: Analog RGB
Component: DVD input YCbCr / YPbPr, or
HDTV input YPbPr via HD15 connector
• Composite Video: Traditional composite video
• S-Video: Super video (Y/C separated)
•
HDMI
– 10 –
TM
: HDMI
TM
, DVI
To Next Page
Loading...
Need help?
General
