Vivitek D7 Series User Manual

DLP Projector – User’s Manual
Adjusting the Projector Level
Take note of the following when setting up the projector:
• The projector table or stand should be level and sturdy.
• Position the projector so that it is perpendicular to the screen.
• Remove the Back Foot Holder on the rear adjuster foot before adjusting the projection
angle.
• Ensure the cables are in a safe location. You could trip over them.
1.
To raise the level of the projector, twist
the adjusters clockwise.
2.
To lower the level of the projector, lift
the projector and twist the adjusters
counter clockwise.
– 14 –

Vivitek D7 Series Specifications

General

Brand	Vivitek
Model	D7 Series
Category	Projector
Language	English