To Next PageTo Next Page
Need help?Do you have a question about the Vivo DESK-KIT-1B5B and is the answer not in the manual?
General| Brand | Vivo |
|---|---|
| Model | DESK-KIT-1B5B |
| Category | Indoor Furnishing |
| Language | English |
Follow installation directions, check parts, and avoid improper use to prevent damage or injury.
Prevent shock, fire, and burns by following power-on safety, no cleaning while connected, and no disassembly.
Contains small parts not suitable for children under 3 years; adult supervision is required.
Securely attach feet to the legs using M6x16 bolts and the 5mm Allen wrench as shown.
Adjust and attach the telescopic crossbar to the legs using M8x50mm bolts and the 5mm Allen wrench.
Insert and secure the sync rod into the legs, connecting it to the motor connector.
Fasten side brackets to the frame ends using M6x16mm bolts, ensuring correct orientation.
Position and secure the controller and control unit to the desktop with screws after drilling pilot holes.
Attach baffles to the telescopic crossbar using M4x6mm bolts for cable management or support.
Connect all internal cables, the power cable, and then to a wall outlet for operation.
Avoid exceeding weight limits, clear motion path, balance load, and provide adequate cable slack for proper function.
