Vivotek FD8133V - Page 130

VIVOTEK
130 - User's Manual
15
updateinterval 0,
3600,
86400,
604800,
2592000
0 6/6 0 to Disable automatic time
adjustment, otherwise, it
indicates the seconds between
NTP automatic update intervals.
restore 0,
<positive integer>
N/A 7/6 Restore the system parameters to
default values after <value>
seconds.
reset 0,
<positive integer>
N/A 7/6 Restart the server after <value>
seconds if <value> is
non-negative.
restoreexcept
net
<Any value> N/A 7/6 Restore the system parameters to
default values except
(ipaddress, subnet, router,
dns1, dns2, pppoe).
This command can cooperate with
other “restoreexceptXYZ”
commands. When cooperating
with others, the system
parameters will be restored to
the default value except for a
union of the combined results.
restoreexcept
dst
<Any value> N/A 7/6 Restore the system parameters to
default values except all
daylight saving time settings.
This command can cooperate with
other “restoreexceptXYZ”
commands. When cooperating
with others, the system
parameters will be restored to
default values except for a union
of combined results.
restoreexceptl
ang
<Any Value> N/A 7/6 Restore the system parameters to
default values except the
custom language file the user
has uploaded.
This command can cooperate with
other “restoreexceptXYZ”
commands. When cooperating