Vivotek FD8138-H - Motion Detection Settings

VIVOTEK
User's Manual - 167
URL Command Document for All Series
36
URL Commands for FD8138-H
profile_i0_enable <boolean> 0 4/4 Enable/disable this profile
setting
profile_i0_policy day,
night,
schedule
night 4/4 The mode which the profile
is applied to.
profile_i0_begintime hh:mm 18:00 4/4 Begin time of schedule
mode.
profile_i0_endtime hh:mm 06:00 4/4 End time of schedule mode.
profile_i0_alarm_level 1~100 50 4/4 Audio detection alarm level
7.13 Time Shift settings
Group: timeshift, c for n channel products, m is stream number
NAME VALUE DEFAUL
T
SECURIT
Y
(get/set)
DESCRIPTION
enable <boolean> 0 4/4 Enable time shift streaming.
c<0~(n-1)>_s<0~(
m-1)>_allow
<boolean>
<stream
depende
nt>
4/4 Enable time shift streaming for
specific stream.
s0 default =1, other default =0.
7.14 Motion detection settings
Group: motion_c<0~(n-1)> for n channel product
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 4/4 Enable motion detection.
win_i<0~2>_enable <boolean> 0 4/4 Enable motion window 1~3.
win_i<0~2>_name string[14] <blank> 4/4 Name of motion window 1~3.
win_i<0~2>_left 0 ~ 320 0 4/4 Left coordinate of window
position.
win_i<0~2>_top 0 ~ 240 0 4/4 Top coordinate of window
position.
win_i<0~2>_width 0 ~ 320 0 4/4 Width of motion detection
window.
win_i<0~2>_height 0 ~ 240 0 4/4 Height of motion detection
window.