Vivotek FD8167-T - Page 277

VIVOTEK
User's Manual - 277
URL Command Document for All Series
52
URL commands for FD8367
1: Support remote focus
7.24 WebAPI: Information for a channel
Group: capability_videoin_c<n>, n = channel index from 0 to "capability_nvideoin"-1
PARAMETER VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
nmode <Positive
Integer>
1 0/99 Indicate how many video modes
supported by this channel.
maxsize <WxH> 1920x1080 0/99 The maximum resolution of all
modes in this channel, the unit is
pixel.
mode <Integer> 0 0/99 Indicate current video mode.
nresolution <Positive
Integer>
7 0/99 How many resolution options
(listed in "resolution") in current
video mode.
resolution A list of
<WxH>
176x144,
384x216,
640x360,
1280x720,
1360x768,
1600x904,
1920x1080
0/99 Resolution options in current
video mode. These options are the
possible options for
"videoin_c<n>_s<m>_resolution".
The last one is the maximum
resolution in current mode.
maxframerate A list of
<Integer>
30,
30,
30,
30,
30,
30,
30
0/99 Indicate how many frame rate
image sensor outputs in current
video mode.
One to one mapping to the
resolution in "resolution".
mjpeg_ maxframerate A list of
<Positive
Integer> and
"-"
30,
30,
30,
30,
30,
30,
30
0/99 Maximum fps that the device can
encoded with MJPEG on
resolutions in current video mode.
"-" means not support.