Vivotek FD8167-T - Page 278

VIVOTEK
278 - User's Manual
URL Command Document for All Series
53
URL commands for FD8367
mjpeg_maxbitrate <Positive
Integer>, -
40000000 0/99 Maximum bitrates of MJPEG.
The unit is bps.
"-" means MJPEG does not
support bit rate control.
h264_ maxframerate A list of
<Positive
Integer> and
"-"
30,
30,
30,
30,
30,
30,
30
0/99 Maximum fps that the device can
encoded with H.264 on resolutions
in current video mode.
"-" means not support.
h264_maxbitrate <Positive
Integer>
40000000 0/99 Maximum bitrates of H.264.
The unit is bps.
streamcodec <Positive
Integer>
6,6,6 0/99 Represent supported codec types
of each stream.
This contains a list of positive
integers, split by comma. Each
one stands for a stream, and the
definition is as following:
Bit 0: Support MPEG4.
Bit 1: Support MJPEG
Bit 2: Support H.264
7.25 WebAPI: Information for a mode
Group: capability_videoin_c<n>_mode<m>, n = channel index from 0 to "capability_nvideoin"-1, m
= mode index from 0 to "capability_videoin_c<n>_nmode"-1
PARAMETER VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
effectivepixel <WxH>
1920x1080
0/99 The visible area of full scene in
this video mode.
The unit is pixel in source.
outputsize <WxH>
1920x1080
0/99 The output size of source, equal to
the captured size by device, in this
video mode. The unit is pixel.
This value is used as a basic
coordinate system for many
features, like ePTZ, privacy mask,
motion, etc.