VIVOTEK
28 - User's Manual
Video Stream: This Network Camera supports multiple streams (channel # and stream #1 ~ #3)
simultaneously. You can select any one of them for live viewing. For more information about multiple
streams, please refer to page 57 for detailed information.
Manual Trigger: Click to manually enable or disable an event trigger. Please congure an event setting
before enabling this function. A total of 3 or 4 event settings can be congured. For more information
about event setting, please refer to page 99. If you want to hide this item on the homepage, please go
to the System > Homepage Layout > General settings > Customized button to deselect the “show
manual trigger button” checkbox.
Digital Output: Click to turn the digital output device on or off.
PTZ Control Panel:
Pano.: Click this button to start the automated circular rotation through a regional view (360° continuous
rotation). Note that this function does not apply in a Panoramic view because a Panoramic view already
shows the full coverage.
Stop: Click this button to stop the Auto Pano and Auto Rotate functions.
Pan /Tilt /Zoom /Panoramic speed: Adjust the speed of these controls when exerted:
Conguration Area
Client Settings: Click this button to access the client setting page. For more information, please refer to
Client Settings on page 33.
Conguration: Click this button to access more of the conguration options provided with the Network
Camera. It is suggested that a password is applied to the Network Camera so that only the administrator
can configure the Network Camera. For more information, please refer to the description for the
Conguration menus on page 37.
Left
Down
Zoom Out
Start to Auto Pano
Stop Auto Pano
Return to Home Position
Right
Up
Zoom In
Rotate
The following apply to both FD816C and FE8182.
To Next Page
Loading...
Need help?
General
