Vivotek FD8371EV User Manual

VIVOTEK
User's Manual - 159
7.10 IR cut control
Group: ircutcontrol (capability.nvideoinprofile > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
mode auto,
day,
night,
di,
schedule
<product
dependent>
auto 1/6 Set IR cut control mode
daymodebegintime 00:00~23:59 07:00 6/6 Day mode begin time
daymodeendtime 00:00~23:59 18:00 6/6 Day mod end time
bwmode <boolean> 1 1/6 Switch to B/W in night mode if
enabled
sensitivity low,
normal,
high
normal 1/6 Sensitivity of light sensor
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightnesspercent 0~100 0 4/4 Adjust brightnesspercent of
image
saturationpercent 0~100 50 4/4 Adjust saturation value of
percentage when
saturation=100
contrastpercent 0~100 50 4/4 Adjust contrastpercent of image
sharpnesspercent 0~100 50 4/4 Adjust sharpness value of
percentage when
sharpness=100
dnr_mode 0~1 0 4/4 0:disable
1:enable
dnr_strength 0~2 1 4/4 Strength of DNR
profile_i0_enable <boolean> 0 4/4 Enable/disable this profile setting
profile_i0_policy day, night 4/4 The mode which the profile is

Vivotek FD8371EV Specifications

General

Brand	Vivotek
Model	FD8371EV
Category	Security Camera
Language	English