VIVOTEK
256 - User's Manual
localstorage_supportedge 0,
<positive integer>
0/7 An 32-bit integer, which indicates the
supportive application of edge storage.
If the value of this parameter is larger than 0,
it means that the camera supports edge
recording function.
bit 0 : It supports to record directly to an
on-board SD-Card.
bit 1~: Currently, they are reserved bit, and
the default value is 0.
* Only available when "capability_supportsd"
is 1 or "capability_storage_dbenabled" is 1.
localstorage_slconnum
0,<positive integer>
0/7 The maximum seamless connection number. * Only available when "capability_supportsd"
is 1 or "capability_storage_dbenabled" is 1.
localstorage_smartsd <boolean> 0/7 The "Lifetime and Log SD Card" feature allows
users to obtain the card's remaining lifetime
information.
0: Non-support this feature
1: Support this feature
* Only Sony SD card can support this function
now.
* Only available when "capability_supportsd"
is 1 or "capability_storage_dbenabled" is 1.
remotecamctrl_master
0, <positive
integer>
0/7 Indicate whether to support remote auxiliary
camera (master side), this value means
supporting max number of auxiliary camera.
remotecamctrl_slave <boolean> 0/7 Indicate whether to support remote camera
control (slave side).
fisheyelocaldewarp_c<0~
(capability_nvideoin)-1>
<product dependent>
0, <positive
integer>
0/7 Indicate the supported streams of local
dewarp. One bit represents one supported
stream. The LSB indicates stream 0.
Ex: “3” means stream 0 and stream 1 support
local dewarp.
* Only available when "capability_fisheye" > 0
shockalarm_support <boolean> 0/7 Indicate whether to support the shock
detection.
* We support this parameter when the version
number (httpversion) is equal or greater than
0306e.
To Next Page
Loading...
Need help?
General
