Vivotek FD9367-HTV User Manual

VIVOTEK
326 - User's Manual
and the uart_i<0~(n-1)>_databit set as 5 as
well.
uartmode rs485,
rs232
4/4 RS485 or RS232.
customdrvcmd_i<0~9> string[128] 1/4 PTZ command for custom camera.
speedlink_i<0~4>_name string[40] 1/4 Additional PTZ command name.
speedlink_i<0~4>_cmd string[40] 1/4 Additional PTZ command list.
ptzdriver 0~19,
127 (custom),
128 (no driver)
1/4 The PTZ driver is used by this COM port.
7.44 UART control (SD series)
Group: uart_i<0~(n-1)> n is uart port count (capability.nuart > 0 and the bit7 of capability_ptzenabled is 0, the
bit4 of capability_ptzenabled is 1)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
cameraid 1~255 4/4 Camera ID controlling external PTZ camera.
Note:
Please set your speed dome to the appropriate
baud rate, and Camera ID, e.g. 2400bps,
camera ID 1,2,3,,,,etc.
All Camera IDs on the same controlling system
(NVR or rs485 keyboard) have to be distinct.
Therefore, once you send a controlling signal,
each camera will only accept the inputs with
the corresponding ID.
baudrate 2400,4800,9600,19
200,38400,57600,1
15200
4/4 Set baud rate of COM port.
databit 5,6,7,8 4/4 Data bits in a character frame.
paritybit none,
odd,
even
4/4 For error checking.
stopbit 1,2 4/4 "1": One stop bit is transmitted to indicate the
end of a byte.
"2": Two stop bits are transmitted to indicate

Vivotek FD9367-HTV Specifications

General

Focal Length	2.8 ~ 12 mm
Shutter Time	1/5 sec. to 1/32, 000 sec.
IR Illuminators	Built-in
IR Range	30 m
Video Compression	H.265, H.264, MJPEG
Audio Compression	G.711, G.726
Audio Input	Built-in Microphone
On-board Storage	microSD/SDHC/SDXC card slot
Operating Temperature	-30°C ~ 50°C (-22°F ~ 122°F)
Weather Resistance	IP66
Vandal Resistance	IK10
Image Sensor	1/2.8" CMOS
Maximum Resolution	1920x1080
Aperture	F1.4
Day/Night	Yes
Maximum Frame Rate	30 fps
Ethernet	10/100 Base-TX
Protocols	IPv4, IPv6, HTTP, HTTPS, FTP, SMTP, SNMP, DHCP, NTP, DNS, DDNS, PPPoE, 802.1X, QoS
Power Supply	IEEE 802.3af PoE Class 0
Power Consumption	Max. 6.5W